Armorgard CuttingStation SS7C Adjustable Saw Clamp

The Armorgard CuttingStation Saw Clamp holds a mitre saw or metal cut off saw firmly on an SS7 CuttingStation worksurface. Armorgard lists it as the SS7C. It is made from powder coated steel. The adjustable design suits most chop saws and mitre saws used on site.

How wide is the range? It takes saw fixing holes from 110mm to 600mm apart. Depth runs from 30mm to 475mm. Two bolt lengths come in the box. That lets you match different saw bases. The clamp measures 30mm x 1000mm x 550mm and weighs 4kg.

Fitting is simple. You retrofit it to an existing SS7 CuttingStation. It adds only 30mm to the worksurface height. Your working height stays comfortable. Once the saw is bolted down it cannot creep out of position during long runs of repeat cuts.

A saw that moves is a safety risk. This clamp keeps the saw locked in place for repeatable cuts and safer working. It suits carpenters and joiners who cut the same lengths all day. Metal fabricators using a cut off saw will get the same benefit.

The clamp spans a wide range of saw footprints. Fixing holes from 110mm to 600mm apart and depths from 30mm to 475mm cover most chop saws and mitre saws. Two bolt lengths let you match thicker or thinner saw bases. At only 30mm high it barely raises the saw. That keeps the cutting height comfortable for long sessions. In use the saw sits on a fixed footprint. Every cut lands in the same place.

Bolt the saw down fully before you plug it in or fit a battery. Use the bolt length that suits your saw base and check all fixings are tight. Re-check them now and then as vibration can loosen hardware. Keep the worksurface clear of offcuts. Wear eye and ear protection when cutting.