Einhell MSS 1610 Aluminium Mitre Saw Stand with Roller Supports

The Einhell MSS 1610 Mitre Saw Stand is a light aluminium workstation for mitre saws and other benchtop machines. It suits carpenters, joiners and contractors who cut on site as well as in the workshop. The mounting brackets detach from the frame without unbolting. So the saw comes off fast and travels on its own.

Size and support are sorted. Working height is 84.5cm to the upper edge of the carrier. That keeps long days at the saw comfortable. Optional extensions take machines up to 455mm wide. Maximum load is 100kg. Pull out supports on both sides carry easy running rollers. Slide your timber into position before you cut.

Setting up takes little time. Lever operated quick fasteners adjust the legs fast. One height adjustable foot levels the stand on uneven ground. Two storage trays on the frame hold fixings and small parts within reach. A carrying handle on the underside makes it easy to move between rooms or jobs.

Why pick this one? You get a stand that levels on rough floors and a 100kg load rating. You also get roller supports on both sides for long lengths and detachable brackets for quick saw removal. It makes sense when your saw moves around a lot.

The frame is high grade aluminium. That keeps weight down while holding a 100kg load. The mounting nut size is 8mm so check your saw's feet against that. The brackets release without unbolting. In use that means the saw lifts off in seconds and the stand folds for the van. The extensions widen the bracket span for machines up to 455mm.

Level the stand with the adjustable foot before you cut. Lock the lever fasteners on every leg. Keep the total weight under 100kg. Clamp or bolt the saw to the brackets and check it does not rock. Set the roller supports to the height of the saw table so long timber cannot tip or bind in the blade.