Festool CTMC SYS Cleantec Twin 18v Cordless M Class Dust Extractor

The Festool CTMC SYS Cleantec Twin 18v Cordless M Class Dust Extractor is built into a Systainer. It runs on two 18V battery packs. They power a 36V turbine. There is no need for a mains socket. It is made for one person working on the move.

Maximum volume flow is 2,400 l/min. Maximum vacuum is 18,000 Pa. You get three suction levels. The container and bag hold 4.5 and 3.5 litres. Filter area is 5,357 cm². Dust class M gives 99.9% filtration. That meets COSHH needs for dusts above 0.1 mg/m³.

It weighs just 6.0 kg without accessories. A shoulder strap is supplied. It measures 396 x 297 x 307 mm. Connect it to other Systainers with T-LOC. Bluetooth autostart and the CT-F I remote start it with a compatible cordless tool.

This one suits service engineers and mobile tradespeople in tight spots. It offers M Class filtration and light carry weight. Runtime on two 4.0 Ah packs is 14 to 25 minutes. Four packs on a TCL 6 DUO charger extend that.

Two 18V packs in series give a 36V turbine. That delivers 2,400 l/min and 18,000 Pa. M class means 99.9% filtration of dusts with an exposure limit above 0.1 mg/m³. A large 5,357 cm² filter area helps hold suction as the bag fills. Three levels let you trade power for runtime on smaller jobs.

Check the dust you are collecting is covered by M class. Empty the bag before it is full. Switch off and remove the packs before changing filters. Keep the hose clear of blades and bits while cutting. Wear a dust mask for fine or hazardous dusts.