Festool KAPEX KS 120 REB 260mm Sliding Compound Mitre Saw

The Festool KAPEX KS 120 REB is a sliding compound mitre saw that takes 260mm blades. It is a trade saw for joiners and carpenters. There are no guide rods sticking out of the back, so it needs little bench space.

The twin-column guide has two bearings on each side. It is double sealed and stays play-free on site. Capacity at 90 degrees is 305 x 88mm. At 45 degrees mitre it cuts 215 x 88mm. A special position cuts depths up to 120mm.

A dual-line laser marks the cut line. You can fine tune the blade angle from the front of the machine. The inclination angle is 47 degrees each way. Mitre angle is 50 and 60. It cuts crown moulding in its wall position too.

The 1600W motor runs at 1400 to 3400 per minute. FastFix blade changing is quick and a safety brake stops the blade. It weighs 23.1kg. The 240V saw comes with a bevel, hex key, universal blade and workpiece clamp. A 110V version is also sold.

The twin-column guide uses spherical bushings on both sides. That gives two layers of protection against play in the slide. The result is a carriage that stays on line after years of site use. The dual-line laser throws two lines either side of the blade. You see the real kerf, not a guess. The special cutting position lets the head work upright on tall stock. The 1600W motor spins at 1400 to 3400 per minute.

Clamp the workpiece with the supplied clamp. Let the blade stop fully before moving the stock. The safety brake helps but do not rely on it. Keep fingers clear of the sliding path at the rear. Use the 27 or 36mm dust port with an extractor. Unplug before blade changes. Use 110V on active building sites where required.