Makita VC4210MX M Class Wet and Dry Dust Extractor 240V

The Makita VC4210MX M Class Dust Extractor is a wet and dry machine for trade use. It removes 99.9% of dust with a limit value above 0.1 mg/m³. This is the 240V model. A 110V version is also sold. It has a power take-off socket for your tool.

The M Class approval covers a wide range. That includes mica and china clay and gypsum. It also covers softwood and hardwood dust. Silica dust from masonry and concrete is covered too. Can it handle your cutting jobs? Very likely if the dust is in that list.

The tank holds 42 litres dry or 29 litres wet. The dust bag holds 30 litres. Input power is 1200W. Max airflow is 4.5m³/min. Max sealed suction is 25 kPa. The automatic filter cleaning system keeps suction up. The PTFE filter has a washable non stick membrane. An airflow sensor beeps when flow drops.

Setup is quick and easy. Auto on and off starts the machine with the tool. The power take-off handles up to 1800W. Speed regulation lets you tune suction. Hose diameter settings are individual. A flat top holds hand tools. The hatchback opening gives easy filter access. Big wheels and steel castors move the 16kg body around.

M Class extractors are tested for dust above 0.1 mg/m³. That is the class for silica and hardwood dust. The PTFE filter has a non stick membrane so dust falls off during automatic cleaning. The airflow sensor warns you when the hose or filter is blocked. In real use you cut without choking on dust. The power take-off cuts out the need for a second plug. Speed regulation lets you lower suction for fine work.

Fit the filter before every start. Check the power take-off load stays under 1800W. Do not suck up hot embers or flammable liquids. Wear a dust mask when emptying the bag. Heed the airflow sensor beep. Unplug before service. Lock the castors when parked. Lift the 16kg body with care or get help.