Sealey SM355D 355mm Metal Cut Off Saw

The Sealey SM355D Metal Cut Off Saw is a 355mm abrasive saw. It is made for general metal cutting on site and in the workshop. Fabricators, metal workers and contractors will find it a dependable all rounder.

Capacity is the big draw. At 90 degrees it cuts 105mm bar and Ø120mm pipe. Rectangular box section goes to 90 x 130mm. Angle reaches 100mm. Swing the mitre vice to 45 degrees for 50mm bar and Ø80mm pipe. Rectangular box is 80 x 50mm.

A 2480W motor drives the disc at 3800rpm no load on a 230V supply. Hardened gears pass that power across smoothly. A trigger gives you control of the cut. At 20kg it is steady on the bench yet still movable for site work.

You get a 355mm abrasive disc in the box so you can start cutting at once. Spare discs are the PTC/355C. The mitre vice clamps work securely at both 90 and 45 degrees. A good fit for steel sections and pipe runs.

A 2480W motor gives plenty of torque to push a 355mm abrasive disc through thick steel. The no-load speed is 3800rpm. Large discs turn slower than small ones to keep the rim speed safe. Hardened gears carry that power to the spindle with less wear. The vice holds the work still so the cut stays square or true to 45 degrees. Bigger capacity means bar to 105mm and pipe to Ø120mm at 90 degrees.

Clamp every workpiece in the mitre vice. Check the 355mm disc for cracks before use. Let it run up to speed before the cut. Wear eye protection ear defenders and gloves. Sparks fly forward so clear flammable items away. Stand to the side of the disc line. Unplug the saw before you change a disc.