Makita VC2512L L Class Dust Extractor 25L

The Makita VC2512L L Class Dust Extractor is a 240V wet and dry vacuum built for site work. L Class filtration captures 99% of dust with a grain size under 2 microns. This version has no power take off socket.

A 1000W motor gives 210 mbar of max sealed suction. Air volume is 3.6 m³/min. Gross tank volume is 25 litres. Of that 21 litres is for dust and 18 litres for liquids. The 3.5m hose is 32mm wide. The power cord is 5m.

It measures 390 x 390 x 530mm. That is small enough to move through doorways and store in a van. The cleaning button frees the filter without any tools. It runs at only 72dB. Quiet running keeps noise down in occupied buildings.

Who is it for? Trades who need to meet HSE guidance on dust. L Class filtration suits controlled dust work like cutting and sanding. Note the missing power take off socket. You will need to switch it on by hand when you use a power tool.

L Class is a dust class for fine non-hazardous dust. This machine captures 99% of particles under 2 microns. Max sealed suction of 210 mbar is the pull when the hose is blocked. Air volume of 3.6 m³/min is how much air flows when it is open. A high figure on both helps with fine dust from cutting and sanding.

Check the filter and bag are fitted before every use. Do not use L Class machines for hazardous dust such as asbestos. Unplug before emptying or cleaning. Keep the 5m cable clear of wet areas and sharp edges. Do not pick up burning or glowing material. Empty liquids before you move the machine.