Makita VC3011L L Class Wet and Dry Dust Extractor 30L

The Makita VC3011L is an L Class extractor that picks up both wet and dry debris. It has a 30 litre stainless steel drum. That drum resists corrosion and is IP24 splash protected. Internal parts stay safe in damp or dirty places. It comes in 110V and 240V versions.

Suction is strong. Maximum sealed suction is 21kPa. Maximum airflow is 3.6m²/min. The hose is 3.5m long and 32mm across. The dust bag holds 28 litres. Wet capacity is 23 litres. The 110V version draws 1000W.

Filtering is simple to look after. A washable PET cartridge filter protects the turbine from fine dust. A fleece filter bag copes with awkward debris. Push and Clean uses the airflow to shake dirt off the filter at the press of a button. The unit weighs 11kg.

It is built for low-maintenance use. The recessed carry handle makes lifting easy. The flat top holds tools and containers. A rubber strap keeps the hose tidy when stored. Note the 110V version has no power take off socket.

Sealed suction of 21kPa shows how hard the motor can pull with the hose blocked. Higher figures lift heavier, wetter material. Airflow of 3.6m²/min decides how quickly dust is carried off a tool. The PET cartridge filter stops fine dust reaching the turbine. When it clogs, Push and Clean sends a burst of air back through it. That keeps suction up without taking the filter out.

Check the filter and bag are fitted before every use. Do not use it to pick up hot embers or flammable liquids. The drum is IP24 splash protected, not waterproof, so never submerge it. Empty the wet tank before moving it. Use the correct supply: 110V on site, 240V elsewhere. Unplug before changing the filter or bag.