Einhell TCT Mitre Saw Blade 216mm 48 Tooth

The Einhell TCT Mitre Saw Blade is a 216mm blade with 48 teeth and a 30mm bore. TCT means tungsten carbide tipped. The teeth are made to stay sharp for longer. It is made for wood based materials. That covers trim and skirting as well as architrave and structural timber.

The 48 tooth version gives a good balance of speed and finish. It also comes in a 60 tooth version. Both are 216mm across with the same 30mm bore. More teeth generally give a finer cut. Fewer teeth cut faster. Pick the one that suits your job.

Will it fit your saw? Einhell says it suits Einhell mitre saws and other machines with matching specs. Check your saw takes a 216mm blade and a 30mm arbor first. The Einhell part code is 49588251. Quote it if you need to reorder.

This is a straightforward replacement blade. It gives clean and precise cuts with long lasting carbide teeth and works well in workshop and site conditions. Swap it in when your old blade burns or tears the edge of the board.

The blade has tungsten carbide tips brazed to a steel plate. Carbide holds an edge far longer than steel. A 48 tooth count sits in the middle ground. It cuts reasonably quickly and still leaves a tidy face on skirting and trim. The 30mm bore must match your saw arbor. The 216mm diameter must match the blade size your saw is rated for.

Unplug the saw or remove the battery before changing the blade. Check the diameter and bore match your saw. Fit the blade facing the right way and tighten the arbor bolt fully. Never exceed the maximum speed marked on the blade. Keep the guard in place and wear eye and ear protection.