Trend CRAFTPRO Mitre Saw Blade 190mm 24 Tooth

The Trend CRAFTPRO Mitre Saw Blade is a 190mm blade with 24 teeth and a 30mm bore. The model is CSB/CC19024. It is built for fast crosscutting of heavier timber on 190mm mitre saws. The low tooth count removes material quickly in hardwood and softwood. It also cuts plywood and chipboard.

The teeth are tungsten carbide tipped with an ATB tooth form. Hook angle is minus 5 degrees. Kerf is 2.6mm and plate thickness is 1.7mm. That negative hook gives a controlled feed. The tips are silver brazed to the body so they stay bonded under load.

The bore is reamed for a precise spindle fit. A 30mm to 20mm bushing washer is in the box. It helps the blade fit more machines. The plate is high grade alloy steel and precision ground to stay flat. It is laser etched to EN847-1/2 on the reverse.

Use it where speed matters more than a glass smooth finish. You get fast crosscutting with secure carbide tips and a precise fit on the spindle. It suits framing and rough joinery as well as site carpentry.

Twenty four teeth means big gullets between each tooth. They clear chips quickly from thick timber. ATB teeth alternate their bevel for a clean knife edge on the face of the cut. The minus 5 degree hook angle makes the blade feed gently into the work rather than grab. The plate is hardened alloy steel. The silver braze holds the carbide tips on under heavy load.

Unplug the saw before changing the blade. Check the 190mm diameter and 30mm bore suit your machine. Fit the bushing washer only if your spindle needs it. Make sure the blade spins the right way. Clamp the timber firmly and wait for full speed before cutting. Wear eye and ear protection.