Freud LCL6M 165mm Circular and Mitre Saw Blade

The Freud LCL6M is a 165mm blade made for hand held saws. It cuts hardwood and softwood. It also handles plywood and chipboard as well as MDF. The model code is F03FS09686. Freud sells it for circular saws and mitre saws that take a 165mm blade.

The teeth are Freud made Titanium Cobalt Carbide. Freud calls it TiCo. It gives a sharper edge and a longer cutting life. The Perma Shield coating is non stick. It resists corrosion and cuts resin build up. That means less time cleaning the blade.

The size is 165mm across with a 20mm bore. Kerf is 1.7mm and plate thickness is 1.3mm. Check your saw takes these before you buy. Anti vibration slots help keep the blade running smoothly and quietly. A tri metal brazing alloy absorbs impact on the teeth.

It is best for ripping and good for crosscutting. Expect a clean finish and a long cutting life with less resin clogging. The material is laser marked on each blade so you can spot it quickly. Reach for it when you want one blade for mixed timber and board jobs.

TiCo is a dense titanium cobalt carbide made by Freud. It keeps a sharp edge longer than standard carbide. The Perma Shield coating adds thermal insulation and stops resin sticking. Slots cut into the plate absorb vibration. A tri metal braze holds each tooth on with copper between two silver layers. That layer soaks up shock when you hit a knot or nail.

Disconnect power before fitting the blade. Check the 165mm diameter and 20mm bore match your saw. Make sure the blade spins the correct way and tighten it fully. Clamp the work and keep hands clear of the cut line. Wear eye and ear protection and a dust mask when cutting MDF.