Makita MAKBLADE PLUS 190mm 24T Circular Mitre Saw Blade for Wood 20mm Bore

The Makita MAKBLADE PLUS Circular Mitre Saw Blade for Wood is a 190mm blade with 24 teeth and a 20mm bore. It is made for cutting wood on mitre saws and circular saws. Makita sells the range in sizes from 165mm to 355mm.

Twenty four teeth is a low count. That favours quick cutting through timber over a fine finish. The tooth angle is 5 degrees and the cutting width is 2.2mm. Advanced tooth geometry helps keep splintering to a minimum for a clean cut line.

The blade is made from premium materials for durability and a longer working life. Its design cuts friction and heat build-up. That gives a smoother cutting action. Check that your saw takes a 190mm blade with a 20mm bore before you order.

Who needs it? Trade users and serious DIYers cutting battens, framing and general timber. You get fast cutting, minimal splintering, less heat build-up and a long blade life from a trusted tool brand.

A blade with 24 teeth has big gullets between each tooth. These clear sawdust fast so the blade cuts quickly and stays cooler. The cost is a rougher edge than a 40 or 60 tooth blade. The 5 degree tooth angle is a gentle bite that suits a mitre saw. A 2.2mm kerf removes a modest amount of timber. In practice it is a quick general purpose blade for rough carpentry and cutting to length.

Disconnect the saw from power before changing the blade. Match the 190mm diameter and 20mm bore to your saw. Fit the blade so the teeth turn in the direction of the arrow. Clamp the timber firmly and keep hands clear. Use only on wood. Wear eye and ear protection and a dust mask.