Bosch PRO Wood Cutting Mitre Saw Blade 254mm 40 Tooth

The Bosch PRO Wood Cutting Mitre Saw Blade in 254mm has 40 teeth and a 30mm bore. It is made for solid wood and wood based panels. You can use it on mitre saws and on table saws. If you switch between machines that is handy. One blade covers both.

The teeth are ground and sharpened carbide. They are made from high quality carbide grains. Each tooth is individually shaped. That gives strength and durability and a precise cut. Expansion slots cut noise and heat build up. That helps the blade last longer.

Will it fit? The bore works with or without reduction rings. So it can suit different arbor sizes. The PRO range runs from 210mm to 305mm with a choice of tooth counts. Pick the variant that matches your saw. This page covers the 254mm 40 tooth blade.

Customers report a clean cut quality and fast delivery. The blade gives long life when cutting wood for site and workshop jobs. It suits woodworkers who want accurate cuts in all kinds of solid timber and board.

A 254mm blade with 40 teeth suits general crosscutting in timber. The teeth are carbide ground to a fine edge. Each is shaped for its place on the plate. Laser cut expansion slots let the plate flex slightly as it heats. That keeps it flat and quiet. The 30mm bore takes reduction rings so one blade can fit saws with a smaller arbor.

Unplug the saw before swapping blades. Check the 254mm diameter and the arbor size match your machine. Fit reduction rings squarely if you need them. Tighten the arbor bolt fully and spin the blade by hand to check clearance. Keep the guard on and wear eye and ear protection.